Creality Falcon 2 LightBurn Settings (3-minute Read)

If you’ve just purchased the Creality Falcon 2 Laser Engraver, you’re probably eager to dive into the world of laser engraving and cutting. One of the key components of maximizing the potential of your Falcon 2 is understanding and utilizing the LightBurn software.

In this section, we will guide you through the process of getting started with LightBurn and help you harness its capabilities for your laser projects.

Getting Started with LightBurn

Installing LightBurn

Before you can begin using LightBurn, you’ll need to install the software on your computer. LightBurn is compatible with both Windows and MacOS operating systems, ensuring accessibility for a wide range of users.

Simply visit the LightBurn website and follow the instructions for downloading and installing the software on your computer.

Connecting your Falcon 2 to LightBurn

Once you have LightBurn installed, it’s time to connect your Falcon 2 laser engraver to the software. Begin by ensuring that your Falcon 2 is powered on and connected to your computer via a USB cable.

Launch LightBurn and navigate to the “Devices” tab. Click on the “Find my Laser” button, and LightBurn will search for and connect to your Falcon 2. Once connected, you’re ready to start using LightBurn with your laser engraver.

Navigating the LightBurn Interface

The LightBurn interface may seem overwhelming at first, but with a little practice, you’ll become familiar with its various tools and features.

The main workspace is where you’ll create and edit your designs, while the toolbar provides quick access to essential tools such as drawing shapes, importing images, and adjusting settings.

Designing and Preparing Your Project

Whether you’re engraving a personalized gift or cutting out a prototype, LightBurn offers the flexibility and precision needed for your projects.

Experiment with different shapes, adjust power and speed settings and preview your design before sending it to your Falcon 2 for engraving or cutting.

Safety Precautions

While using LightBurn and operating your Falcon 2 laser engraver, it’s important to prioritize safety. Always wear appropriate protective eyewear when working with lasers, and ensure that your work area is well-ventilated.

Familiarize yourself with the safety guidelines provided by Creality and follow them diligently to prevent accidents or injuries.

Read > Creality Falcon 2 Accessories: 7 Essentials You Must Have

Engraving Parameter Settings

Right parameter settings can make all the difference in achieving the desired results. In this section, we will explore the optimal engraving parameter settings for different materials and thicknesses.

Basswood

• Thickness: 2mm
• Power: 25%
• Work Speed: 6000 mm/min
• Passes: 1

Walnut Plywood

• Thickness: 3mm
• Power: 20%
• Work Speed: 6000 mm/min
• Passes: 1

Rosewood Plywood

• Thickness: 3mm
• Power: 20%
• Work Speed: 6000 mm/min
• Passes: 1

Bamboo

• Thickness: 3mm
• Power: 25%
• Work Speed: 6000 mm/min
• Passes: 1

Kraft Paper

• Thickness: 0.15mm
• Power: 12%
• Work Speed: 6000 mm/min
• Passes: 1

Red Card Paper

• Thickness: 0.2mm
• Power: 8%
• Work Speed: 6000 mm/min
• Passes: 1

Red Felt

• Thickness: 0.8mm
• Power: 7%
• Work Speed: 6000 mm/min
• Passes: 1

Brown Leather

• Thickness: 0.65mm
• Power: 12%
• Work Speed: 6000 mm/min
• Passes: 1

Black Opaque Glossy Acrylic

• Thickness: 3mm
• Power: 26%
• Work Speed: 4000 mm/min
• Passes: 1

Purple Opaque Glossy Acrylic

• Thickness: 3mm
• Power: 26%
• Work Speed: 6000 mm/min
• Passes: 1

Red Opaque Glossy Acrylic

• Thickness: 3mm
• Power: 26%
• Work Speed: 6000 mm/min
• Passes: 1

Orange Opaque Glossy Acrylic

• Thickness: 3mm
• Power: 26%
• Work Speed: 6000 mm/min
• Passes: 1

Green Opaque Glossy Acrylic

• Thickness: 3mm
• Power: 26%
• Work Speed: 6000 mm/min
• Passes: 1

Red Transparent Acrylic

• Thickness: 3mm
• Power: 12%
• Work Speed: 3000 mm/min
• Passes: 1

Yellow Transparent Acrylic

• Thickness: 3mm
• Power: 12%
• Work Speed: 3000 mm/min
• Passes: 1

Green Transparent Acrylic

• Thickness: 3mm
• Power: 12%
• Work Speed: 3000 mm/min
• Passes: 1

Black Frosted Acrylic

• Thickness: 3mm
• Power: 22%
• Work Speed: 3000 mm/min
• Passes: 1

Orange Frosted Acrylic

• Thickness: 3mm
• Power: 30%
• Work Speed: 1200 mm/min
• Passes: 1

Green Frosted Acrylic

• Thickness: 3mm
• Power: 30%
• Work Speed: 1200 mm/min
• Passes: 1

Purple Frosted Acrylic

• Thickness: 3mm
• Power: 30%
• Work Speed: 1000 mm/min
• Passes: 1

Anodized Aluminum

• Thickness: 3mm
• Power: 30%
• Work Speed: 6000 mm/min
• Passes: 1

Brushed Stainless Steel

• Thickness: 2mm
• Power: 40%
• Work Speed: 6000 mm/min
• Passes: 1

White Tile Painted Black

• Thickness: 6mm
• Power: 28%
• Work Speed: 4000 mm/min
• Passes: 1

These parameter settings are a starting point for achieving optimal engraving results with the Creality Falcon 2 Laser Engraver. However, it’s important to note that different materials and variations in laser modules may require slight adjustments to these settings.

It is always recommended to conduct tests on your specific material to fine-tune the settings and achieve the desired outcome.

Remember, the power and speed settings can affect the depth and precision of the engraving. Higher power or slower speed will result in a deeper effect, while lower power or faster speed will produce a shallower effect.

Cutting Parameter Settings

Whether you’re working with different materials or varying thicknesses, the following cutting parameter settings will guide you in obtaining precise and clean cuts.

Basswood

• Thickness: 2mm
• Recommended Power: 100%
• Recommended Work Speed: 400 mm/min
• Passes: 1

Walnut Plywood

• Thickness: 3mm
• Recommended Power: 100%
• Recommended Work Speed: 350 mm/min
• Passes: 1

Rosewood Plywood

• Thickness: 3mm
• Recommended Power: 100%
• Recommended Work Speed: 350 mm/min
• Passes: 1

Bamboo

• Thickness: 3mm
• Recommended Power: 100%
• Recommended Work Speed: 450 mm/min
• Passes: 1

Kraft Paper

• Thickness: 0.2mm
• Recommended Power: 80%
• Recommended Work Speed: 4000 mm/min
• Passes: 1

Red Card Paper

• Thickness: 0.2mm
• Recommended Power: 50%
• Recommended Work Speed: 4000 mm/min
• Passes: 1

Red Felt

• Thickness: 0.8mm
• Recommended Power: 55%
• Recommended Work Speed: 4000 mm/min
• Passes: 1

Brown Leather

• Thickness: 0.65mm
• Recommended Power: 100%
• Recommended Work Speed: 2000 mm/min
• Passes: 1

Black Acrylic

• Thickness: 4.6mm
• Recommended Power: 100%
• Recommended Work Speed: 300 mm/min
• Passes: 2

Purple Opaque Glossy Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 2

Red Opaque Glossy Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 1

Orange Opaque Glossy Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 2

Green Opaque Glossy Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Red Transparent Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Yellow Transparent Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 2

Green Transparent Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Black Frosted Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 200 mm/min
• Passes: 1

Orange Frosted Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Green Frosted Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Purple Frosted Acrylic

• Thickness: 3mm
• Recommended Power: 95%
• Recommended Work Speed: 120 mm/min
• Passes: 3

Anodized Aluminum

• Thickness: 3mm
• Recommended Power: 100%
• Recommended Work Speed: 250 mm/min
• Passes: 1

Brushed Stainless Steel

• Thickness: 2mm
• Recommended Power: 100%
• Recommended Work Speed: 800 mm/min
• Passes: 1

White Tile Painted Black

• Thickness: 6mm
• Recommended Power: 85%
• Recommended Work Speed: 4000 mm/min
• Passes: 1

These cutting parameter settings will help you achieve precise and clean cuts on a variety of materials with your Creality Falcon 2 Laser Engraver. Remember to adjust the power and work speed based on the thickness and desired outcome.

Tips and Tricks for Optimal Engraving Results

When using the Creality Falcon 2 Laser Engraver with LightBurn, there are a few tips and tricks that can help you achieve the best possible results.

Clean the lens and adjust the focal length

Before starting any project, make sure the lens of the laser module is clean and the focal length is correctly adjusted.

Use a dustless cloth and alcohol to clean the lens, ensuring no smudges or debris could affect the laser’s performance.

Test different power and speed settings

Generally, higher power or slower speed will result in deeper engravings or cuts, while lower power or faster speed will produce shallower effects.

Take the time to test different settings on scrap materials to find the perfect balance for your specific project.

Consider material color and composition

Different materials may require adjustments in power, speed, or even the engraving mode used.

For example, engraving on brushed stainless steel can produce colorful effects by setting different parameters.

Use a honeycomb worktable for cutting

When cutting materials, especially those with a bottom surface that should not be damaged, it’s recommended to use a honeycomb worktable.

This will allow the laser to cut through the material without causing any unwanted marks or burns on the workbench. Consider using aluminum plates or other materials that are not easily penetrated by the laser to protect your work surface.

Join the Creality Falcon community

The Creality Falcon Facebook group is a fantastic resource for connecting with other users, sharing ideas, and getting support.

It’s a great place to ask questions, receive suggestions, and stay updated with the latest developments related to the Creality Falcon 2 Laser Engraver.

Troubleshooting Common Issues

When using the Creality Falcon 2 Laser Engraver with LightBurn, you may encounter some common issues that can affect the quality of your engravings and cuts. We will discuss these issues and provide troubleshooting tips to help you overcome them.

1. Inconsistent Engraving Depth

If you notice that your engravings have inconsistent depth, there are a few possible causes.

• First, check the focus of the laser. Make sure that the focal length of the laser module is correct and that the lens is clean. Dust and debris on the lens can affect the focus and result in uneven engraving depth.
• Another factor to consider is the power and speed settings. Adjusting the power and speed can help achieve a more consistent engraving depth. Experiment with different settings to find the optimal combination for your desired results.

2. Burned or Scorched Edges

Burned or scorched edges can occur when the laser power is too high or the speed is too slow. This can be especially problematic when cutting materials like wood or acrylic.

To avoid burned edges, try reducing the power and increasing the speed. Finding the right balance between power and speed will help achieve clean and precise cuts without scorching the edges.

3. Uneven Cutting

Uneven cutting can be caused by a few factors. First, check the alignment of your workpiece. If it is not properly aligned, it can result in uneven cuts.

Double-check the focal length and cleanliness of the lens to ensure optimal cutting performance.

4. Software Compatibility Issues

If you are experiencing issues with the LightBurn software, such as crashes or connectivity problems, there are a few steps you can take to troubleshoot.

First, make sure that you have the latest version of LightBurn installed. Updates often include bug fixes and improvements that can resolve common issues.

If the problem persists, check your computer’s compatibility with the software. Ensure that your operating system meets the minimum requirements and that your computer has enough resources to run LightBurn smoothly.

5. Material Compatibility

Not all materials are suitable for laser engraving and cutting. If you are experiencing issues with a particular material, check the compatibility list provided by Creality Falcon 2. Using unsupported materials can result in poor engraving or damage to the laser module.

If you are unsure about the compatibility of a specific material, it is always best to consult the manufacturer or conduct a test on a small sample before proceeding.

Read > How to Set the Strength of Airflow on Creality Falcon2?

Conclusion

In conclusion, the Creality Falcon 2 Laser Engraver paired with LightBurn software is a winning combination for achieving exceptional results in laser engraving and cutting projects. Now hope you have a better understanding about the lightburn settings!