(Solved)Creality K1C Mid-Print Pauses issues: For Beginners

creality k1c 2
(Solved)Creality K1C Mid-Print Pauses issues: For Beginners 20

Introduction

Printing something big and tall with your K1C Creality printer should be a seamless experience. However, many users encounter an issue where the printer pauses mid-print for a few seconds, causing unsightly pimples on the surface of their prints. This article delves into the causes of this problem and provides practical solutions to ensure your prints come out smooth and flawless.

Understanding the Problem

The mid-print pausing issue typically arises during the production of large and tall prints. These brief pauses disrupt the printing process, leading to the formation of pimples on the print surface. Such imperfections can be frustrating, especially when you’re aiming for high-quality results.

Potential Causes and Solutions

SD Card or USB Connection Issues

One of the primary causes of mid-print pauses is related to the SD card or USB connection. The printer writes the save position to the card, but if the card is lagging, it causes a pause.

  1. Solution: Use a high-quality, high-speed SD card, such as those from Kingston, to avoid read-errors and ensure smooth data transfer.

Printer Firmware and Software Issues

Sometimes, the problem lies within the printer’s firmware or the Creality Print software. Users have reported bugs in Creality Print 5.1 that cause these pauses.

Solution: Revert to Creality Print 5.0 or try using an alternative slicer like Orca. Keeping your printer firmware updated can also help mitigate these issues.

Slicer Settings Adjustments

Incorrect slicer settings, such as minimum layer time, can also cause the printer to pause.

Solution: Check and adjust your slicer settings, particularly focusing on the minimum layer time and speed settings. This is especially important when printing with PETG filament.

Power Failure Recovery

The power failure recovery feature, which saves the print position in case of a power outage, can sometimes cause the printer to pause.

Solution: Disable power failure recovery by adding m413 s0 to your starting gcode. This will prevent the printer from pausing to save the print position.

Filament Type and Settings

Specific filament settings can trigger bugs in the printer’s software, leading to mid-print pauses.

Solution: Experiment with different filament settings or switch to another filament type to see if the issue persists.

creality k1c 03
(Solved)Creality K1C Mid-Print Pauses issues: For Beginners 21

Preventative Measures

To prevent future issues, it’s essential to adopt a proactive approach. Here are some key preventative measures:

Regular Maintenance

Regular maintenance of your 3D printer is crucial for its smooth operation. Clean the print bed and extruder regularly to prevent the buildup of dust and debris, which can affect print quality. Lubricate the moving parts to ensure they function smoothly and reduce the risk of mechanical issues.

Firmware and Software Updates

Keeping your printer’s firmware and slicing software up to date is vital. Manufacturers often release updates to fix bugs, improve performance, and add new features. Regularly check for updates and install them to ensure your printer operates with the latest improvements.

Use High-Quality Components

Investing in high-quality components, such as SD cards and filaments, can significantly impact print quality. Low-quality SD cards can cause read-errors and pauses, while inferior filaments can lead to clogs and inconsistent prints. Opt for reputable brands to avoid these issues.

Optimize Slicer Settings

Optimizing your slicer settings is essential for achieving the best print quality. Pay attention to settings such as layer height, print speed, and temperature. Test different settings to find the optimal configuration for your specific printer and filament type.

Monitor Print Conditions

Environmental factors, such as temperature and humidity, can affect 3D printing. Ensure your printer is located in a stable environment with consistent temperature and humidity levels. Sudden changes can cause warping and other print defects.

Backup and Recovery Plans

Have a backup plan in case of power outages or other unexpected interruptions. While disabling power failure recovery can prevent mid-print pauses, it’s essential to have a strategy for resuming prints if necessary. Consider using a UPS (Uninterruptible Power Supply) to safeguard against power interruptions.

Conclusion

Dealing with mid-print pauses can be challenging, but with the right approach, it’s possible to overcome this issue and achieve high-quality prints. By following the solutions outlined above, you can ensure your K1C Creality printer operates smoothly.

DISCLOSURE: THIS POST MAY CONTAIN AFFILIATE LINKS, MEANING I GET A COMMISSION IF you DECIDE TO MAKE A PURCHASE THROUGH MY LINKS, AT NO COST TO YOU. PLEASE READ MY DISCLOSURE FOR MORE INFO.

Latest Posts

Discover more from 3DPadvisor

Subscribe now to keep reading and get access to the full archive.

Continue reading