The Solvo SV06 Plus – The Best Budget 3D Printer just got Bigger and Better

In conclusion, the upgrades included in this machine make it stand out from other models, with a metal direct drive extruder, all-metal hot end, auto bed leveling, belt tension knobs, high-speed printing, and thicker linear rods. The tips provided for the initial setup are helpful in ensuring that users get the best possible results.

The pros of this machine, such as an easy assembly process, touch screen, large build plate, and filament holder with bearings, make it a wise investment for people who require high-quality printing. However, the non-standard volcano-style nozzle and microSD slot may be an issue for some users. Overall, this 3D printer is an impressive model that offers excellent features at an affordable price point.

Included Upgrades:

  • Metal direct drive extruder
  • All metal hot end
  • Auto bed leveling
  • Belt tension knobs
  • High-speed printing
  • Thicker linear rods

Tips for Initial Setup:

  • Check belt tension to ensure it is not too tight or too loose, being careful to avoid over-tightening.
  • Follow the leveling guide provided in the included handout.
  • Save your settings once complete.
  • Adjust the extruder screw as necessary when loading filament.
  • Change the voltage on the power supply if using within the United States.
  • Verify all screws and hot end silicone cover are tightened and set properly.
  • Ensure the silicone cover is pushed all the way up to avoid filament smashing while printing.

Pros & Cons

Pros

  • Easy assembly
  • Metal direct drive extruder
  • Auto bed leveling
  • All metal hot end
  • Easy leveling using the guide
  • Rapid setup, with the first print starting in about 30 minutes
  • Touch screen
  • Filament runout sensor
  • Filament holder with bearings
  • Large 300x300x340mm build plate
  • Screw guides for PEI magnetic build plate

Cons

  • Non-standard volcano-style nozzle, requiring a modified fan duct to fit

Solvo SV06 Plus Features

MicroSD slot instead of a full-sized SD card.

In the world of 3D printing, a budget-friendly printer with a large build volume is a rare find. However, the Solvo SV06 Plus is one such printer that ticks all the right boxes, making it the perfect choice for anyone looking to take their 3D printing experience to the next level.

Assembly

The Solvo SV06 Plus is super easy to assemble, thanks to its user-friendly design. Unboxing is quick, and it only takes around 15 minutes to get it fully ready to print with 12 screws or bolts to put in. The printer has a 32-bit silent board that makes it very quiet while printing, and the assembly process is hassle-free.

Melt zone

The Solvo SV06 Plus still uses an all-metal hotend with a planetary direct drive system, but with an upgraded Melt zone, making it much larger. This upgrade allows the printer to print at faster speeds of up to 150 millimeters a second, and delivers better-quality prints, making it perfect for projects that require high-speed printing.

Build Volume

The Solvo SV06 Plus boasts a build volume of 300 by 300 by 340, making it larger than its predecessor, the Solvo SV06. This extra space offers more room to print large and complex models, giving you more flexibility to create the perfect project.

Bed Leveling

The printer comes with touchless bed leveling right out of the box and features a 25-point leveling system, making it easy to adjust and maintain a level print surface. This feature saves you time and hassle, ensuring smooth printer operation and optimal print quality.

Control Screen

The Solvo SV06 Plus features a 4.3-inch touchscreen control screen that is easy to use and offers a clear and intuitive interface. The screen has a day and night mode, which lets you adjust the brightness according to your preferences, making it easy on the eyes even during prolonged use.

Build Surface

The SV06 Plus still uses the same PEI flex plate, but much larger than the one on the SV06. It features built-in bed tensioners that make it easy to tension belts, and an advanced filament run-out sensor that reduces the risk of print failures, ensuring that you can print for an extended period without interruptions.

Power Supply

The power supply of the Solvo SV06 Plus has been upgraded to 500 watts, which is a significant improvement over its predecessor, the Solvo SV06, which had a 350 watts power supply. This extra power allows the printer to handle more massive and more complex print jobs, ensuring efficient and uninterrupted printing.

Spool Holder

The spool holder of the Solvo SV06 Plus has been improved, and it now includes bearings that make it roll better, making it more comfortable to reload filaments. It also comes with a filament run-out sensor attached, which is another great feature that reduces the risk of print failure during lengthy printing jobs.

Rail System

The Solvo SV06 Plus uses a rail system instead of wheels or V slots, making it more stable and delivering precise and accurate prints. This is a significant upgrade over its predecessor, the Solvo SV06, and is a feature commonly found on more expensive printers like the Prusa.

Slicer

The Solvo SV06 Plus comes with Solvo slicer, which is a reskinned version of Kira that came on the SD card. The Solvo slicer delivers faster printing speeds than the Prusa slicer, which is what most users prefer. With a claimed speed of up to 150 millimeters a second, this printer is perfect for printing projects that require high-speed printing.

Prints

In terms of print quality, the Solvo SV06 Plus delivers exceptional results, with minimal layer lines and high-quality prints. The printer has been tested to deliver excellent print quality for small and large prints alike, making it a perfect choice for all 3D printing enthusiasts.

Solvo SV06 vs Solvo SV06 Plus

Title
Sovol SV06 Plus
Image
Sovol SV06 Plus 3D Printer with 300℃ High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch
Price
$285.62
Amazon Prime
Amazon Prime
Rating
Where to Buy
Title
Sovol SV06 Plus
Image
Sovol SV06 Plus 3D Printer with 300℃ High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch
Price
$285.62
Amazon Prime
Amazon Prime
Rating
Where to Buy

Final Thoughts

Overall, the Solvo SV06 Plus is an excellent 3D printer that offers a large build volume, easy assembly, advanced features, and high-quality prints. It is a great budget-friendly printer that delivers impressive results and makes 3D printing more accessible and enjoyable. If you are in the market for a budget 3D printer, we highly recommend checking out the Solvo SV06 Plus.

DISCLOSURE: THIS POST MAY CONTAIN AFFILIATE LINKS, MEANING I GET A COMMISSION IF you DECIDE TO MAKE A PURCHASE THROUGH MY LINKS, AT NO COST TO YOU. PLEASE READ MY DISCLOSURE FOR MORE INFO.

Leave a Reply

Latest Posts