How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included)

3D printed octopus is always popular with people who like 3D printers. It’s cute and useful, so it’s no surprise that we all love it. If you have a 3D printer nearby, why not try to print some models of octopuses? In this article, we will guide how to 3d print an octopus step by step and there are also 7 popular and best 3D printed octopus stl files that can be downloaded.

For example, you can 3D print an octopus with legs that move around. You could also use an octopus model to try out different filaments, especially ones that are flexible. 

Also, if you like plants, there are even planters that look like octopuses. Let’s take a look at some of the best octopus models that can be printed in 3D.

How to Make a 3D Printed Octopus?

  1. Choose the octopus models you want to print and click on Thingiverse files.
  2. Let’s go to Thingiverse details and look at the developer’s suggestions so that we can remember them when we’re messing with the slicer.
  3. Go back to Thingiverse files and click the download button for either the octopus support or the spiral sub, depending on what you chose to print.
  4. Once that’s done, click on this carrot-showing folder, hold down on the STL file, and drag it to the Cura software. Once you plug it in, it should take a few seconds to load up, and when it does, you’ll see a cute little model right on your screen.
  5. Let’s start playing around with the settings now. First, we’ll go to the profile tab, click on this box, and choose a layer height of 0.2 millimeters. Click on that, and if this window pops up, click “Discard Changes.” We don’t want to use any of the old print settings from your last print job, so we’ll use completely new settings here.
  6. The next setting we’ll change is infill. If you like weights on your model as I do, set this info density to 15 and forget about the zero percent for tentacles infill and the 15 for everything else like the head. I like when the legs shake because of the weight, so if you’re a beginner, stick with 15.
  7. Save the file, and then send it to your printer.

7 Best 3D Printed Octopus STL Files

1. Fun Articulated Octopus

Fun Articulated Octopus
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 8

Source: Cults3d

Direct printing, meaning no need for support during printing. You may spin it on your fingers thanks to a hole in the top of the skull. The author produced several variations to ensure a good bed-sticking print.

2. Octopus 2.0

Octopus 2.0
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 9

Source: Cults3d

There is no need for support or assembly while printing in situ. Both smooth and textured filament is available. There are also interchangeable tentacles, so there’s no need to toss away defective prints!

3. Mini Octopus

Mini Octopus
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 10

Source: Cults3d

This cute little Octopus is moveable and can be printed without any extra support. It’s made to be printed all at once. No putting together or supporting is needed. There are a lot of different STL files with tentacles that are straight or spiral, with or without support.

4. Octopus Davy Jones

Octopus Davy Jones
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 11

Source: Cults3d

This is a Davy Jones pirate octopus that can move and doesn’t need any support.

It is a Print-in-place design that doesn’t need to be put together.

5. Keychain Octopus

Keychain Octopus
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 12

Source: Thingiverse

Complete Octopus Keychain that can be printed and is best for EOS Lasersintersystem M100.

Sized to 0.5 and completely mounted with gaps of 0.07 to 0.1mm to make sure they can be moved after being detached from the building platform.

6. Kawaii Octopus PiggyBank

Kawaii Octopus PiggyBank
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 13

Source: Cults3d

Octobank is a cute piggy bank shaped like an octopus. You may access your money in this piggy bank by unscrewing the mouth, a feature that will keep your coins safe from prying eyes. The standard coin size is 16cm in height. The eyes are likewise distinct components; as such, they may be printed using a different material, eliminating the need for any further painting.

7. Articulated Octopus

image
How to Make a 3D Printed Octopus 2024 (Best 7 Free STL Files Included) 14

Source: Cults3d

There is no post-print assembly required for this object.

If you want higher-quality prints, I recommend including support structures.

If you’d like to print on a larger scale, the spiral octopus will make that possible.

Conclusion

With the printing instructions above and seven of the best 3D Printed octopuses, It’s easy to choose the one you like and start printing your own work. Don’t forget to leave comments below if you have any questions, and we’ll get back to you as soon as we can.

DISCLOSURE: THIS POST MAY CONTAIN AFFILIATE LINKS, MEANING I GET A COMMISSION IF you DECIDE TO MAKE A PURCHASE THROUGH MY LINKS, AT NO COST TO YOU. PLEASE READ MY DISCLOSURE FOR MORE INFO.

Latest Posts

Discover more from 3DPadvisor

Subscribe now to keep reading and get access to the full archive.

Continue reading