Best Enclosed 3D Printer 2023: Buying Guides

Our top-rated 3D printers and most others lack covers but why would you need one? That’s because an enclosed 3D printer prevents cool air from warping problems. It can save time with ABS and Nylon filaments. Enclosures also improve safety, especially important in schools and homes with children and animals.

DIY enclosures for 3D printers are available. What if you want a case from the maker or out of the box? See our best fully enclosed 3d printer below.

What are the best enclosed 3d printers?

1. FLASHFORGE Adventurer 3 3D Printer

This printer prints well for the money! The Adventurer 3 Pro and Adventurer 4 give more remote control and larger build volumes if you like this printer but are willing to spend more. The Flashforge Adventurer 3 is a cheap, confined, easy-to-use 3D printer. It simplifies 3D printing for novices and has a quick-change nozzle design. The 3D printer’s 0.4 mm, 240 °C tip is standard and this lets you 3D print PLA, ABS, and PETG easily.

Its low price has several drawbacks. Small build rates and proprietary software are important. It can only print small-to-medium items without splitting your models due to its small print area. Flashprint has fewer tools than open-source printer software.
But In schools and other educational settings, the Flashforge Adventurer 3 is a budget-friendly enclosed 3D printer. Its safety and writing quality are ideal for these situations.

Specifications:

Build Volume	150 x 150 x 150 mm
Layer Resolution Low	400 micron
Layer Resolution High	100 micron (0.004 in.)
Nozzle Diameter	0.4
Filament Diameter	1.75
Print Speed Max.	100 mm/s

Pros: 

• Super easy to load and unload filament
• A lot of helpful YouTube videos to help you get started
• Super clean-looking design and is easy to monitor what is going on.

Cons:

• Using proprietary slicer software that is limited when compared to others like Cura and Prusa slicers.
• It can only hold a 500g roll of filament so you will have to print out a spool holder for 1kg rolls and mount it on the outside.
• It has a smaller build volume than most 3d printers.

2. R QIDI TECHNOLOGY X-PlusⅡ 3D Printer

The X-PLUSII will offer two new upgraded extruders which are dual-gear extruders with better heat dissipation, less clogging, and more accurate printing although the printer already has a standard extruder with a maximum working temperature of 250 °C. It is compatible with TPU, PLA, and ABS. Nylon, PA12-CF, and PC can all be printed using the high-temperature extruder, which has a maximum production temperature of 300 °C. When you print big model sizes, the printing quality is more precise and stable. It has a 10.6×7.9×7.9 inches print size which is enough for most people. 

A filament runout monitor is included with X-PLUSII. There is no need to be concerned about the filament running out when printing a big model. It will sound like a warning to you. The printer will immediately save the breakpoint if there is a power outage while printing. The QIDI software’s redesigned UI layout is smarter and easier to use. The software’s slicing algorithm has been modified, which increases efficiency by 20% and print quality by 30%. All models of QIDI printers are interoperable with the QIDI software.

Pros: 

• Decent build volume
• Beginner-friendly
• Can be used for both beginner and professional needs

Cons:

• The Touchscreen display has poor sensitivity
• A proprietary slicer is not for everyone

Machine Size	560(L)*450(W)*420(H)mm
Print Size	270*200*200mm
Print Accuracy	0.05-0.2mm
Print Speed	30-150mm/s
Extruder Temp	300℃
Extruder Quantity	Existing extruder + Additional extruder
Nozzle Diameter	0.4mm
Support Material	Carbon fiber, Nylon, PETG, TPU, PC, ABS, PLA…
Compatibility	Windows 64 bit/Mac
Power	350W
Voltage	110-220V
Connection Software	QidiPrint/Cura/Simplify 3D
N.W.	30KG
Connection Options	WIFI/LAN/USB Pen Drive

3. WEEDO TINA2S 3D Printers for Kids and Beginners

It has a large pre-sliced file capacity and automatic bed leveling. The mini printer can be set up and operating in a few minutes. It is the ideal first-time FDM printer for children and beginners! The small printer is 210*210*290mm in dimension, and its prints measure 100*105*100mm. It barely occupies any space. The printer can be connected via USB, SD card, or WiFi. It is interoperable with the PoloPrint Pro App, Cura, Simplify3D, and WiiBuilder software. Printing can be wirelessly and distantly controlled. The TINA2S wifi module upgrade ensures a quicker and more reliable transfer.

You have access to awesome pre-sliced models through their Poloprint Cloud software. Additionally, you can use the simple Wiibuilder Software to carve your own model. Copying is simple to do. It makes a wonderful present for children on their birthday, Christmas, Thanksgiving, or Halloween. 

Pros:

• Small in size, perfect for smaller prints. 
• It’s quiet, no surprise there. Kids and teachers enjoy watching it
• The software is EASY to use. Comes with WiiBuilder and Cura which is awesome for more detailed projects
• Uses PLA (earth-friendly filament) great for kids and TPU friendly which is flexible for making squishes or plush prints.
• Customer service has been outstanding. I had a breakdown with one of my machines and they were QUICK to make it right. I now have three machines in the classroom which have created well over hundreds of prints each.

• Easy to maintain. Simple cleaning and greasing where necessary

Cons:

• The plate is not heated which sometimes creates issues with adhesion with rafts on prints. On the positive side, the plate is flexible so it is easy to remove prints.
• Material Pla
• Color TINA2S (SD Card/App/Wi-Fi)
• Product Dimensions 8.27″D x 8.27″W x 11.42″H
• Compatible Devices Personal Computer, Smartphone

4. Dremel DigiLab 3D45-01 3D Printer

One of the best 3D printer choices for printing advanced materials is the Dremel Digilab 3D45 Idea Builder. You can print almost any 1.75mm filament with ease thanks to its compatibility with ECO-ABS, Nylon, PETG, and PLA filaments as well as an all-metal 0.4 mm nozzle that warms up to 280°C and a removable glass build plate that heats up to 100°C.

The Dremel 3D45 3D Printer is the best option for design, engineering, academic use, or commercial 3D printers. It is a Google For Education Partner and the winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses.

You can go straight from unboxing to printing with their guided setup procedure. The built-in RFID reader recognizes the 1.75mm Dremel filament you place inside and automatically selects the best print settings for you, and the 4.5-inch full-color touchscreen has an intuitive interface that makes it easy to quickly navigate through various functions. Features include a complete 3D printer enclosure made of ultra-durable plastic with a 6.7″ X 10″ X 6″ build volume, an automated 9-point leveling sensor with a 6.7″ X 10″ X 6″ build volume, a built-in HD camera for remote print monitoring from any computer or mobile device, and more.

Pros:

• Prints well, right out of the box.
• Easy, guided setup.
• No assembly, testing, or tweaking
• Easy to use touch screen interface, Web-based ‘cloud’ printing through WIFI, and easy-to-use slicer included
• Great US-based customer support
• Fully enclosed, and VERY quiet.
• All metal hot end can handle just about any filament

Cons:

• The building area is on the small side
• Designed to use Dremel filaments. You CAN use 3rd party, but you’ll have to make some changes. Dremel spools are smaller than ‘normal’ spools.
• A little tough to adjust settings while printing

5. FlashForge Creator Pro 3D Printer

The FlashForge Creator Pro has an excellent industrial design and high-end manufacturing. Because it is made to industrial standards and has two linear guides, it can print with more accuracy and faster speed. The printer has an enclosed design, being able to use a wide variety of materials. When printing various types of filaments, you can choose between ventilated printing and enclosed printing. The rapid steady heating prevents model warping, making it much simpler to remove models. PLA, ABS, PVA, HIPS, TPE, TPU, and PETG are among the materials supported by Creation Pro.

Multiple printing types are supported, as well as compatibility with various slicing engines, such as Simplify3D, ReplicatorG, Makerware, Slic3r, Skeinforge, and Cura.

Flashforge Creator Pro Upgrades:

• The compositional lid is replaced by a uni-body lid
• Almost 180 degrees opening front door brings convenience to users.
• 45-degree viewing ergonomic control panel is more comfortable to users
• User-friendly side handles enhance handling comfort
• Solid plastic leveling knobs improve leveling accuracy
• Traditional power is upgraded to the broadband power supply
• Add Quick Start GuideFlashForge Creator Pro 3D Printer

6. Creality 3D CR-200B 3D Printer 

The Creality CR200B’s design is quite appealing, and it can easily blend in with a space without drawing too much attention to itself. Transparent panels on the front and sides enable you to easily monitor your prints. The entire body is white plastic with black accents. The only design that I don’t like is the placement of the spool behind the printer, which makes changing it more difficult if you decide to set the printer on a shelf. While the Creality CR-200B is not the finest equipped printer available, the full enclosure compensates. It prints well with high-temperature fibers. It would have been a much better experience if the PTFE tube inside the heat break had been cut to size, but once that problem was resolved, the printer performed admirably.

If you really need the enclosure and intend to print higher temperature materials, the price of 350$ is reasonable in my opinion. If you don’t, I suggest looking for other options with better specifications and print quality.

Specifications:

• Affordable for most people
• Quiet operation
• Cons
• Lack auto leveling
• Build Small Build volume
• Its upper cover appears to be a little out of place visually.
• Molding technology  FDM
• Number of nozzles 1
• Print size  200x200x200mm
• Machine dimension  411x435x503mm
• Package dimensions 533x499x605mm
• Hotbed temperature  ≤100 °C
• Nozzle temperature  ≤260 °C
• Layer thickness  0.1-0.4 mm
• Supported filament  PLA/ABS
• Printing precision  ±0.1 mm
• Power supply  Input 115-235V, Output 24V
• Diameter of nozzle  0.4 mm

7. Monoprice Voxel 3D Printer 

The Voxel, a unique 3D printer with an easy menu system on a 2.8″ color IPS touch screen, brings 3D printing to the masses. The aided leveling system makes calibration a touchscreen tap, and the print nozzle can be changed in seconds without tools. It has 8GB internal memory, a USB port, a Wi-Fi radio with a hotspot, and a video to monitor printing.

The Monoprice Voxel is a fine 3D printer for its price, features, and print quality. It costs twice as much as the XYZ da Vinci Nano but less than the $400 Polaroid PlaySmart. Cloud printing and a heated print bed make the MP Voxel a better value than novice printers.

Thus, the MP Voxel is ideal for the casual 3D printer or a school or small office that needs a multi-user printer.

Specifications:

• Build Area: 150 x 150 x 150 mm
• Layer Resolution: 0.05 – 0.4 mm
• Build Accuracy: ±0.2mm
• Positioning Accuracy – Z: 0.0025mm
• Positioning Accuracy – XY: 0.011mm
• Print Speed: 10 ~ 100 mm/second
• Nozzle Diameter: 0.4mm
• Filament Size: 1.75mm
• Materials: ABS, PLA, PETG, Exotics
• Internal Memory: 8GB
• Software: MP FlashPrint
• Supported Input Formats: 3MF, STL, OBJ
• Connectivity: USB, WiFi, Ethernet
• OS Compatibility: Windows XP/Vista/7/8/10, Mac OS X, Linux

Pros:

• Ready to go out of the box
• Enclosed, so it is a *bit* safer around little kids
• Wifi connected
• The quality is good. Better than I expected at the price
• Works well with both PLA and ABS (though best results with PLA)
• The Flashpoint software is easy to use (this coming from a first-time printer)
• Touch screen works well
• Great price point
• Great customer service from the manufacturer

Cons:

• Extruder broke on first unit (immediately replaced by tech support)
• Wifi range seems poor
• The quick start guide should recommend doing a calibration. Their online docs cover this, so be sure to read through those and not just the guide that comes with it. 

8. CR-5 Pro (High-temp Version) 3D Printer

The Creatlity CR-5 Pro H is a high-temperature version of the Creatlity CR-5 Pro, so it shares its appealing design, sturdy build, and ample build capacity with its forerunner but is much more powerful. Advanced filament materials that demand temperatures greater than the nozzle’s maximum temperature of 300 degrees Celsius are compatible with the CR-5 Pro H 3D printer.

The CR-5 Pro H’s completely enclosed build chamber, auto-leveling, and carbon crystal silica glass build platform guarantee a calibrated and stable environment for 3D printing. This guarantees that the printer consistently creates top-notch results.

Specifications:

• 3D printing technology: FDM(Fused Deposition Modeling)
• Print volume: 300 x 225 x 380mm (11.8″ x 8.5″ x 14.9″)
• Printing accuracy: ±0.1mm
• Nozzle diameter: 0.4mm(standard)
• Hotbed temperature: ≤110°C
• Onboard interface: 4.3-inch touchscreen
• Nozzle temperature: ≤300°C
• Layer thickness: 0.1-0.3mm
• Slicer software: Cura/Repetier-Host/Simplify3D/Creality slicer
• File format: STL/OBJ/AMF
• Power supply: AC 115/230V/DC 24V
• Filament diameter: 1.75mm
• Printer dimensions: 530 x 487 x 612mm (20.9″ x 19.2″ x 24.1″)
• Printer weight: 32.5KG (72 lbs)
• Shipping dimensions: 625 x 545 x 780mm (24.6″ x 21.5″ x 30.7″)
• Shipping weight: 40KG (89 lbs)

Read More: Creality Ultimate CR-5 Pro Review: Worth It Or Not?

9. R QIDI TECHNOLOGY i Fast 3D Printer 

The I Fast 3D printer uses the second-generation Qidi dual Z-axis frame with linear guides for all motion guides. High-temp extruders extrude material faster and smoother, improving printing accuracy. It prints easily at 100cc per hour with a 20% bump. The Qidi iFast can make PLA, PLA+, ABS, PETG, NYLON, and most FDM 3D printer materials. iFast 3D printers have a 60°C heated room. The mechanical framework allows for stronger manufacturing-grade parts. The Qidi iFast’s software-controlled automated dual extruder moves the left and right extruders up and down.

It’s ideal for printing fine manufacturing parts with PVA (water-soluble) support. It prints smoother and is more durable than normal metal nozzles. The 330250320mm iFast 3D printer has a pre-installed dual blade. QIDI slicing software with expert and basic modes is self-made. Beginners will like the normal mode’s intelligent parameter system, lack of procedures, and simplicity. Expert mode is for advanced users who can change parameters and create custom printing models.

Pros:

• Filament Compatibility
• Fast, Precise Printing
• Premium User Experience

Cons:

• Big and Heavy
• Expensive

Pros & Cons of Enclosed 3D Printers

Pros 

Comparatively speaking, enclosed 3D printers have a better print quality than open-frame printers and that’s because an enclosed print chamber provides an even, warm ambient temperature, like a 3D printer oven. Additionally, they are safer for any pets or children, and because they are closed, they are frequently quieter than standard open-frame printers.

Cons 

The inability to easily clean the interior components or even replace them is a drawback of enclosed 3D printers. They don’t quite give you the opportunity to modify them the way you’re used to.

Factors to be considered when buying enclosed 3d printers

Closure Objectives
Do you want an enclosure to merely safeguard your print from drafts in the living room, or do you require the additional benefit? Your enclosure goal decides different choices with enclosures. You can build your own enclosure or purchase any inexpensive printers with passive enclosures if all you need it for is to keep dust and drafts out of your home.

For novices, the Sermoon is a good option, and the older FlashForge printers all have passive enclosures. On the other hand, if you require an adequately heated chamber, you must pay for it; the higher the temperature you require, the higher the cost.
Up to 60 °C heated rooms can be purchased for a reasonable price, but as the temperature rises, the cost starts to rise significantly. A printer with an 80 °C build chamber will cost you several thousand dollars, and anything with a 100 °C build chamber may require you to refinance your home.

Fully enclosed vs. part of the way
Some 3D printers are completely enclosed, like the Raise 3D Pro 2, Flashforge Adventurer 3, and Adventurer 4. This helps keep the temperature of the 3D printer stable and keeps air from blowing on the 3D prints. Enclosures for 3D printers also quiet down the stepper motors and keep harmful fumes from printing with filaments other than PLA from escaping.

Having a fully enclosed 3D printer improves the overall experience of 3D printing and the quality of the prints.

3D printers like the Ultimaker S5 and the Creality CR-5 Pro, on the other hand, only cover part of the top and have an open top. Even though all of the electronics are well hidden inside the body, the filament spool and Bowden tubes are out in the open. In open-top 3D printers, the temperature in the printing area can change a lot, and since the printing area is open, it is not possible to add an air filtration system.

Carbon Filters and HEPA Filters
During the printing process, 3D printing sends toxic fumes and particles into the air. 3D printer fumes contain toxic VOCs and Ultra Fine Particles (UFPs). In the worst cases, long-term exposure can lead to headaches, nausea, and even problems with breathing.

HEPA filters are made to catch 99.97% of particles that are no bigger than 0.3 microns (m). This stops most of the harmful VOCs from getting in. With an active carbon filter built in, you can get rid of any smell, including UFPs. If you are printing at home or near children, you should really think about getting a 3D printer with a HEPA filtering system.

Develop Chapter
You don’t have to take into account the additional room needed for the panels, top cover, and complete enclosure in open-frame 3D printers. An open 3D printer has a higher build capacity to footprint ratio than one that is enclosed. Added body panels, spool holders, circuitry, and some even have extended top covers are all features of enclosed 3D printers.

For comparison, the enclosed Flashforge Adventurer 4 has a build volume of 220 x 200 x 250 mm, and the 3D printer’s total footprint is 500 x 470 x 540 mm. Similar-sized printing area open-frame Creality Ender 3 only has a 440 x 410 x 465 mm dimension.

You need to be conscious that enclosed 3D printers can occupy a significant amount of desktop space while still having a small printing surface. Be prepared to give up some of your valuable desktop space if you want a larger build capacity and enclosure.

Warming Pattern Bed
Several different 3D printing materials can be used with a 3D printer thanks to its heated print platform. If you want to 3D print with materials such as polycarbonate, nylon, ABS, and PETG, it is a requirement.

It enhances the printing quality with particular materials, especially when you take into account that a heated bed in an enclosed 3D printer serves as a great method to warm up the printing area and maintain it at a stable temperature. It aids in reducing the negative impacts of temperature changes, such as warping and layer-peeling.

Open-source vs the closed world
Some 3D printer makers prefer end-to-end control for optimal printing. This closed ecosystem provides top tools, filaments, and 3D printer-specific solutions.

. Software and hardware are customized for your 3D printer, ensuring constant quality. These printers appear in “3D printers under $1000” and upper categories.

If you want simple 3D printing with few options, the closed ecosystem is ideal. Due to development fees, these 3D printers cost more. They also use expensive materials and parts.

Open-source 3D printers offer full control and many options. You can choose your slicer and filament vendor. Open-source printers are ideal for tinkerers who don’t want to pay for replacement parts and filaments.

Supported Materials
Each printer can use a variety of filaments and components. This is dependent on the print bed’s temperature range and the hot end of the extruder’s highest operating temperature.

Although filaments like nylon and TPU print best at high temperatures and in enclosed spaces, PLA and similar materials don’t require high temperatures to function correctly.

One of the most crucial things to think about is this.

3D printing is a wise investment. Additionally, you want to ensure that you get the finest possible deal for your money. There are less expensive 3D printers available, but keep in mind that there will always be compromises made in favor of higher-quality printers.

Knowing exactly what you need in a printer is crucial, so do your research to find the best fit on the market that falls within your price range.

Printing Time
40mm/s and above is where a decent 3D printing speed begins. The majority of printers on the market can print at a respectable rate, but if you want to use a 3D printer for business or production, you’ll need greater rates—possibly 100 mm/s and higher.

Frequently Asked Questions about 3d printers enclosed

Are enclosed 3D printers better?

Generally speaking, the enclosed 3D printer offers a better working environment by preventing wet air, dust, and unstable temperature. For anyone who wishes to be able to run their printer without worrying about safety, the Enclosed 3D Printer is the ideal printer.

Does PLA benefit from an enclosure?

Although a heated bed and an enclosure are not necessary for PLA printing, we do suggest both for a better printing experience.

Are enclosures bad for 3D printers?

Although it’s not a necessity, a 3D printer container can enhance the quality of your prints. Having a 3D printing enclosure has many benefits, including enabling greater control of the environment’s temperature, which reduces warping.

Will 3D printer overheat in enclosure?

While it is possible, it is rare to occur right away. To keep track of the weather, get a digital thermometer to place inside the enclosure. The first stage is to monitor and gauge the severity of your situation.

Does PETG do better in a enclosure?

We advise using only premium PETG material when printing. Bed Must Be Warm, 70 to 85 C. Although not necessary, an enclosure is advised for the best outcomes.

What is the ideal temperature for a 3D printer enclosure?

The following primary factors sum up the ABS print temperature rules: 220-250 °C at the nozzle. a bed that is between 95 and 110 °C. a structure that keeps the atmospheric temperature constant.

Conclusion

If you want to avoid fumes or work with high-temperature, warp-prone materials, you need a 3D printer with an enclosure.  Anyway, the Adventurer 3 is ideal for 3D printing novices due to its low cost, easy setup, and enclosed printing process.

Flashforge Adventurer 4 is our recommended sealed 3D printer for up to $1000. The affordable Adventurer 4 has more complex features than the Adventurer 3. Its HEPA filtration and bigger build volume stand out. Its wide material compatibility, big build volume, and filtration system make it a top 3D printer. Its high price requires careful consideration of its benefits and features.

Finally, the Ultimaker S5 is for pros who value reliability over price. The S5 costs $6355. However, its high performance, wide material compatibility, and large build volume make it ideal for professional prototyping and small-company use.